Replacing the sun visor in your 2015 Honda Fit Exl is a relatively simple task that can be completed in just a few minutes. However, before you begin, it’s important to gather the necessary tools and materials. You will need a new sun visor, a Phillips head screwdriver, and a flathead screwdriver. Once you have everything you need, you can follow these simple steps to replace the sun visor.
First, use the Phillips head screwdriver to remove the two screws that hold the sun visor in place. Once the screws are removed, carefully pull the sun visor down and away from the headliner. Be careful not to damage the headliner or the sun visor. Next, use the flathead screwdriver to pry the old sun visor clip off of the mounting bracket. Once the clip is removed, you can install the new sun visor clip onto the mounting bracket. Finally, line up the new sun visor with the mounting bracket and push it into place. Once the sun visor is in place, use the Phillips head screwdriver to tighten the two screws that hold it in place.
Replacing the sun visor in your 2015 Honda Fit Exl is a quick and easy task that can be completed in just a few minutes. By following these simple steps, you can save yourself time and money by doing it yourself.
Tools and Materials Required
Screwdriver, Phillips head (small)
A Phillips head screwdriver is a type of screwdriver with a cross-shaped tip that is commonly used for driving Phillips screws, which have a corresponding cross-shaped recess in their heads. Phillips head screwdrivers come in various sizes, and the size required for replacing a sun visor will depend on the specific model of Honda Fit. It is recommended to consult the owner’s manual or a mechanic to determine the correct size screwdriver for the task.
Features:
- Cross-shaped tip
- Various sizes available
- Ergonomic handle for comfortable grip
Types:
- Standard Phillips head
- Magnetic Phillips head
- Stubby Phillips head
Usage:
- Insert the screwdriver tip into the screw head, ensuring that it fits snugly.
- Apply downward pressure on the screwdriver while turning it counterclockwise to loosen the screw.
- Once the screw is loose, remove it completely by hand.
Screwdriver, flat head (small)
A flat head screwdriver is a type of screwdriver with a flat, chisel-shaped tip that is commonly used for driving flat head screws, which have a corresponding flat-bottomed recess in their heads. Flat head screwdrivers come in various sizes, and the size required for replacing a sun visor will depend on the specific model of Honda Fit. It is recommended to consult the owner’s manual or a mechanic to determine the correct size screwdriver for the task.
Features:
- Flat, chisel-shaped tip
- Various sizes available
- Ergonomic handle for comfortable grip
Types:
- Standard flat head
- Magnetic flat head
- Stubby flat head
Usage:
- Insert the screwdriver tip into the screw head, ensuring that it fits snugly.
- Apply downward pressure on the screwdriver while turning it counterclockwise to loosen the screw.
- Once the screw is loose, remove it completely by hand.
Sun visor
The sun visor is the component that is being replaced in this procedure. It is a rectangular panel that is attached to the ceiling of the vehicle and can be manually adjusted to block sunlight from entering through the windshield. Sun visors typically have a reflective surface on one side and a soft, padded surface on the other side. It is important to select a sun visor that is compatible with the specific model and year of Honda Fit.
Features:
- Rectangular panel
- Reflective surface on one side
- Soft, padded surface on the other side
- Manually adjustable
Types:
- Standard sun visor
- Vanity mirror sun visor
- Extending sun visor
Usage:
- Manually adjust the sun visor to block sunlight.
- Close the sun visor when not in use.
- Clean the sun visor regularly with a soft cloth and mild detergent.
Glove
Gloves are not essential for replacing a sun visor, but they can provide protection for your hands from dirt, grease, and possible abrasions. It is recommended to wear gloves if you have sensitive skin or if you are concerned about dirt or grease getting on your hands.
Features:
- Protective covering for hands
- Various materials and sizes available
- Disposable or reusable
Types:
- Nitrile gloves
- Latex gloves
- Vinyl gloves
- Leather gloves
Usage:
- Put on the gloves before starting the procedure.
- Remove the gloves after completing the procedure.
- Dispose of the gloves properly if they are disposable.
Locating the Sun Visor
Before you can replace the sun visor, you must first locate it. The visor is located on the ceiling of the vehicle, above the windshield. It is typically made of plastic or fabric and has a visor that can be flipped down to block the sun from your eyes. Some visors also have a vanity mirror on the back.
Identifying the Type of Sun Visor
There are two main types of sun visors: fixed and retractable. Fixed visors are permanently attached to the ceiling of the vehicle, while retractable visors can be folded up or down when not in use. Retractable visors are more common in newer vehicles.
| Type of Sun Visor | Description |
|---|---|
| Fixed | Permanently attached to the ceiling of the vehicle |
| Retractable | Can be folded up or down when not in use |
To determine the type of sun visor you have, simply look at the ceiling of your vehicle. If the sun visor is attached to the ceiling with screws or bolts, it is a fixed visor. If the sun visor is attached to the ceiling with a hinge, it is a retractable visor.
Locating the Mounting Points
Once you have identified the type of sun visor you have, you can locate the mounting points. The mounting points are the points on the ceiling of the vehicle where the sun visor is attached. To locate the mounting points, simply look for the screws or bolts that are holding the sun visor in place.
If you are having difficulty locating the mounting points, you can consult your vehicle’s owner’s manual. The owner’s manual will typically contain a diagram that shows the location of the sun visor mounting points.
Tools and Materials Required
- New sun visor
- Phillips head screwdriver
- Trim removal tool (optional)
Step-by-Step Instructions
- Turn off the engine and park the car. Allow the car to cool down if it has been recently driven.
- Lower the sun visor. Pull down the sun visor until it is fully extended.
- Locate the screws. There are two screws located on the underside of the sun visor. One is located near the center, and the other is located near the end.
- Remove the screws. Use a Phillips head screwdriver to remove the two screws.
- Gently pull down the sun visor. Once the screws are removed, gently pull down the sun visor to detach it from the mounting bracket.
- Disconnect the electrical connector (if applicable). Some sun visors may have an electrical connector for a vanity mirror or other features. If so, disconnect the connector by pressing the release button.
- Remove the old sun visor. Once the sun visor is detached, remove it completely from the vehicle.
- Install the new sun visor. Insert the new sun visor into the mounting bracket. Make sure that it is properly aligned.
- Tighten the screws. Use a Phillips head screwdriver to tighten the two screws that secure the sun visor to the mounting bracket.
- Reconnect the electrical connector (if applicable). If there is an electrical connector, reconnect it to the sun visor.
- Test the sun visor. Raise and lower the sun visor to make sure that it is functioning properly.
Troubleshooting Common Issues
The sun visor is not staying in place.
This could be due to loose screws or a damaged mounting bracket. Check the screws to make sure that they are tight. If the mounting bracket is damaged, it will need to be replaced.
The sun visor is making a noise.
This could be due to a loose screw or a worn-out hinge. Check the screws to make sure that they are tight. If the hinge is worn out, it will need to be replaced.
The sun visor is not providing adequate sun protection.
This could be due to a damaged or discolored sun visor. Inspect the sun visor for any damage or discoloration. If it is damaged or discolored, it will need to be replaced.
The sun visor is blocking my view.
This could be due to an improperly adjusted sun visor. Adjust the sun visor to a position that does not block your view.
The sun visor is not extending fully.
This could be due to a damaged or obstructed hinge. Inspect the hinge for any damage or obstructions. If the hinge is damaged or obstructed, it will need to be repaired or replaced.
The sun visor is not retracting fully.
This could be due to a damaged or obstructed spring. Inspect the spring for any damage or obstructions. If the spring is damaged or obstructed, it will need to be repaired or replaced.
The vanity mirror light is not working (if applicable).
This could be due to a loose wire or a burned-out bulb. Check the wire to make sure that it is connected securely. If the bulb is burned out, it will need to be replaced.
The sun visor is not fitting properly.
This could be due to an incorrect sun visor or a damaged mounting bracket. Make sure that the sun visor is the correct one for your vehicle. If the mounting bracket is damaged, it will need to be replaced.
I am unable to remove the sun visor.
This could be due to stripped screws or a damaged mounting bracket. If the screws are stripped, they will need to be drilled out. If the mounting bracket is damaged, it will need to be replaced.
Safety Precautions
Before beginning any repairs, it is crucial to take the following safety precautions:
1. Park the vehicle in a safe location.
Choose a flat, stable surface away from traffic and other hazards.
2. Engage the parking brake.
This will prevent the vehicle from rolling while you are working.
3. Disconnect the battery.
This will prevent electrical shorts and potential injuries.
4. Wear appropriate safety gear.
This includes eye protection, gloves, and a mask if necessary.
5. Use caution when handling sharp objects.
Be mindful of any exposed wires or edges that could cause cuts or scrapes.
6. Avoid working in wet or slippery conditions.
This will minimize the risk of slips or falls.
7. Consult the vehicle’s owner’s manual.
Refer to the specific safety guidelines provided for your particular vehicle model.
8. If unsure, seek professional assistance.
Do not attempt repairs beyond your level of expertise. Contact a qualified mechanic for guidance or assistance.
9. Be aware of potential hazards.
Pay attention to any electrical components, hot surfaces, or other dangers that may arise during the repair process.
10. Follow the repair instructions carefully.
Read and understand the steps involved before proceeding. If any deviations are necessary, perform them cautiously and with consideration for safety.
| Specific Hazard | Recommended Safety Measure |
|---|---|
| Electrical shorts | Disconnect the battery |
| Cuts or scrapes | Wear gloves |
| Slips or falls | Use caution in wet or slippery conditions |
| Electrical hazards | Be aware of potential electrical components and hot surfaces |
| Fire | Have a fire extinguisher nearby |
Protecting the Vehicle’s Interior
Benefits of Sun Visors
Sun visors serve multiple essential functions in protecting the vehicle’s interior from harmful elements:
- Reduce Sun Glare: Sun visors extend downward from the ceiling above the front seats, blocking direct sunlight from entering the cabin, reducing glare and improving visibility.
- Prevent Sun Damage: Direct sunlight can damage the interior materials of the vehicle, such as the dashboard, upholstery, and leather, causing fading, cracking, and discoloration. Sun visors create a shield to reduce the impact of harmful UV rays.
- Maintain Cabin Temperature: Intense sunlight can heat up the interior of the vehicle, making it uncomfortable for passengers. Sun visors help block sunlight, reducing the absorption of heat and keeping the cabin cooler.
- Provide Privacy: Sun visors can be adjusted to block sunlight from entering through the side windows, providing privacy for occupants while driving.
Types of Sun Visors
Sun visors come in various types, each offering different features and functionality:
Traditional Sun Visors: These are the most common type of sun visors, designed to extend downward from the ceiling to block direct sunlight. They typically have a pivot joint that allows them to be adjusted to different angles.
Slider Sun Visors: Slider sun visors slide along a track mounted on the ceiling. This allows them to cover a wider area and provide more flexibility in blocking sunlight from different angles.
Integrated Sun Visors: Integrated sun visors are built into the vehicle’s roofline and cannot be removed. They offer a sleek and stylish appearance but may not provide as much coverage as traditional or slider sun visors.
Choosing the Right Sun Visor
When choosing a replacement sun visor, consider the following factors:
- Vehicle Model: Ensure that the sun visor is compatible with the make and model of your vehicle.
- Type: Decide on the type of sun visor that best suits your needs and preferences (traditional, slider, or integrated).
- Size: Make sure the sun visor is the correct size to cover the desired area and extend downward to effectively block sunlight.
- Adjustability: Consider the range of adjustability the sun visor offers to ensure it can be positioned to block sunlight from different angles.
- Color and Material: Choose a sun visor that matches the interior color and material of your vehicle for a cohesive look.
Installing a Sun Visor
Installing a new sun visor is a relatively straightforward process:
- Locate Mounting Points: Identify the mounting points for the sun visor on the ceiling of the vehicle.
- Align Visor: Position the sun visor correctly over the mounting points and ensure it is aligned with the vehicle’s roofline.
- Secure Visor: Fasten the sun visor to the mounting points using the provided screws or bolts.
- Test Visor: Adjust the sun visor to different angles to ensure it is correctly installed and provides the desired sun protection.
Identifying the Correct Sun Visor
To ensure a perfect fit and proper functionality, it is paramount to identify the correct sun visor for your 2015 Honda Fit EXL. Several factors require consideration when selecting the appropriate replacement part:
- Model and Trim: Specify the exact model and trim level of your Honda Fit (EX, EX-L, or LX). This information can be found in the vehicle’s owner’s manual or on the vehicle registration.
- Year: Determine the model year of your Honda Fit, which should be 2015.
- Side (Driver or Passenger): Identify which side the replacement visor is intended for, as the mechanisms and mounting points may differ between the driver and passenger sides.
- Material: Sun visors are typically made from fabric, vinyl, or leather. Choose a material that matches the interior of your Honda Fit or your personal preference.
- Style: Sun visors come in various styles, such as flip-up, slide-out, or retractable. Select a style that suits your needs and preferences.
- Features: Some sun visors may feature additional functionality, such as vanity mirrors, map lights, or card holders. Consider the features that are important to you.
- Matching Color: Ensure the sun visor matches the color of your Honda Fit’s interior trim or headliner.
- Compatibility: Verify that the selected sun visor is specifically designed and compatible with the 2015 Honda Fit EXL. Refer to the manufacturer’s specifications or consult with an automotive professional.
- OEM vs. Aftermarket: Decide whether you prefer an original equipment manufacturer (OEM) visor or an aftermarket replacement. OEM visors offer an exact fit and quality assurance, while aftermarket options may provide a wider selection and potential cost savings.
- Mounting System: Sun visors are secured to the roof of the vehicle using various mounting systems. Familiarize yourself with the mounting system of your Honda Fit to ensure compatibility with the replacement visor.
Cleaning the Mounting Surface Thoroughly
Thoroughly cleaning the mounting surface is crucial to ensure a secure and stable installation of the new sun visor. Follow these detailed steps to prepare the surface:
- Gather Necessary Tools: Collect a clean cloth, rubbing alcohol, and a soft-bristled brush or microfiber towel.
- Remove Loose Debris: Use the soft-bristled brush or microfiber towel to gently remove any loose dirt, dust, or debris from the mounting surface.
- Apply Rubbing Alcohol: Dampen the clean cloth with rubbing alcohol and wipe down the mounting surface thoroughly. This will remove any remaining dirt, oil, or adhesive residue.
- Allow Surface to Dry: Let the mounting surface air dry completely. Ensure that there is no moisture present before proceeding with the installation.
Additional Details for Cleaning the Mounting Surface
| Importance of Thorough Cleaning: Neglecting to clean the mounting surface properly can result in poor adhesion of the new sun visor, potentially leading to it becoming loose or detaching. |
| Rubbing Alcohol Concentration: Use 70% or higher concentration of rubbing alcohol for optimal degreasing and cleaning effectiveness. |
| Drying Time: Allow ample time for the mounting surface to dry thoroughly. Any residual moisture can create air pockets, affecting the bonding process. |
| Alternative Cleaning Solutions: In the absence of rubbing alcohol, you may use a mild detergent solution mixed with water. Rinse and dry the surface thoroughly afterward. |
| Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents, as they can damage the headliner or other interior surfaces. |
Installing the New Visor Securely
Having successfully removed the old sun visor, you can now proceed with installing the new one securely. Follow the steps below to ensure a proper fit and a secure installation:
1. Align the New Visor
Take the new sun visor and align it with the mounting clips on the headliner. Make sure it is positioned correctly and fits snugly into place.
2. Insert the Clips
Using your fingers or a pry tool, gently push the clips on the back of the visor into the corresponding slots on the headliner. Apply firm pressure to ensure the clips are fully engaged.
3. Check for Secure Fit
Tug on the visor to verify that it is securely attached. It should not move or rattle when you pull on it.
4. Replace the Screws
If your sun visor came with screws, locate the pre-drilled holes on the headliner and insert the screws using a screwdriver. Tighten the screws until the visor is held firmly in place.
5. Check for Alignment
Once the screws are tightened, check if the visor is aligned properly. It should be parallel to the dashboard and extend to the appropriate length.
6. Repeat for the Other Visor
If your vehicle has two sun visors, repeat the above steps for the other visor on the opposite side.
7. Test the Operation
Operate the sun visors by flipping them down and up to ensure they move smoothly and stay in place when extended.
8. Adjust the Position
Adjust the position of the visors as needed to provide optimal sun protection and minimize glare while driving.
9. Clean the Visors
Use a soft cloth and a mild cleaning solution to wipe down the new sun visors and remove any dust or debris.
10. Enjoy the Results
You have now successfully replaced the sun visor on your 2015 Honda Fit Exl. Enjoy the improved sun protection and enhanced interior aesthetics.
Materials You’ll Need
- New sun visor (compatible with your 2015 Honda Fit EXL)
- Phillips head screwdriver
- Optional: Trim removal tool (for prying off the trim panel)
Safety Precautions
- Park your vehicle in a safe and well-lit area.
- Turn off the engine and engage the parking brake.
- Disconnect the negative terminal of your battery to prevent electrical shock.
- Wear safety glasses and gloves to protect yourself from debris.
Step-by-Step Instructions
1. Locate the Sun Visor
The sun visor is located above the driver or passenger side window, attached to the headliner.
2. Remove the Screw
Use the Phillips head screwdriver to remove the screw that holds the sun visor in place. The screw is usually located on the side of the visor that faces the window.
3. Detach the Sun Visor
Once the screw is removed, gently pull the sun visor straight down to detach it from the headliner.
4. Disconnect the Electrical Connector (if Equipped)
If your sun visor has an illuminated vanity mirror or other electrical features, disconnect the electrical connector by pressing the release button or unplugging it.
5. Install the New Sun Visor
Align the new sun visor with the mounting bracket on the headliner.
6. Insert the Screw
Insert the screw into the mounting bracket and tighten it using the Phillips head screwdriver.
7. Reconnect the Electrical Connector (if Equipped)
If you disconnected the electrical connector in step 4, reconnect it now by pressing the release button or plugging it back in.
8. Adjust the Position for Optimal Coverage
Adjust the position of the sun visor by rotating it around the mounting bracket until it provides optimal coverage from the sun’s glare.
9. Reinstall the Trim Panel (if Removed)
If you removed the trim panel in step 4, reinstall it by snapping it back into place.
10. Reconnect the Negative Battery Terminal
Reconnect the negative terminal of your battery to restore power to your vehicle.
11. Test the Sun Visor
Start your vehicle and test the sun visor to ensure it is functioning properly. Adjust the angle and position as needed for optimal coverage.
12. Additional Notes
- If you are replacing the sun visor on the passenger side, the steps are similar, but you may need to remove the glove box for better access.
- Some sun visors may have a built-in mirror. If you are removing the old sun visor with a mirror, be careful not to damage the mirror when detaching it.
- It is recommended to replace both sun visors at the same time to ensure consistent coverage and appearance.
How To Replace A Sun Visor 2015 Honda Fit Exl
Replacing a sun visor in a 2015 Honda Fit Exl is a relatively simple task that can be completed in under an hour. Here are the steps involved:
1.
Open the sun visor and locate the two screws that hold it in place. The screws are located at the base of the visor, one on each side.
2.
Remove the screws and pull the sun visor straight down to detach it from the headliner.
3.
Disconnect the electrical connector for the vanity mirror light, if equipped. The connector is located on the back of the sun visor.
4.
Position the new sun visor in place and align it with the holes in the headliner.
5.
Insert the screws and tighten them until the sun visor is securely fastened. Do not overtighten the screws.
6.
Reconnect the electrical connector for the vanity mirror light, if equipped.
7.
Open and close the sun visor to make sure it is operating properly.
People Also Ask About 121 How To Replace A Sun Visor 2015 Honda Fit Exl
What tools do I need to replace a sun visor?
You will need a Phillips head screwdriver and a new sun visor.
How long will it take to replace a sun visor?
It should take less than an hour to replace a sun visor.
Is it difficult to replace a sun visor?
No, replacing a sun visor is a relatively simple task that can be completed by anyone with basic mechanical skills.
Can I replace a sun visor myself?
Yes, you can replace a sun visor yourself by following the steps outlined in this guide.
